BLZKY - MOISTURE BOND ENAMEL, 47-1

  • MSDS: BLZKY
  • Manufacturer: CORONADO PAINT CO
  • Product Name: MOISTURE BOND ENAMEL, 47-1
  • National Stock Number: 8010-00N017368
Product Identification

Product ID:MOISTURE BOND ENAMEL, 47-1
MSDS Date:07/05/1988
FSC:8010
NIIN:00N017368
MSDS Number: BLZKY

Responsible Party
CORONADO PAINT CO
308 OLD COUNTY RD
EDGEWATER, FL 32032-1812
US

Emergency Phone: 904-428-6461

Info Phone: 904-428-6461

Cage: 33200

Contractor
CORONADO PAINT COMPANY, INC.
EDGEWATER, FL 32132-1812 US

Telephone: 904-428-6461

Cage: 33200

Ingredients

PIGMENTS

Fraction By Weight: 30.2%


VEHICLE

Fraction By Weight: 31.9%


MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 35.2%


ISOPROPYL ALCOHOL; (ISOPROPANOL)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 2.7%

OSHA PEL 400 PPM;500 PPM STEL

ACGIH TLV: 400 PPM;500 PPM STEL

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:PRODUCES SEVERE EYE IRRIT,
DRYING OF SKIN. EXCESSIVE INHAL CAUSES HEADACHE, DIZZINESS, NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH W/POTABLE WATER FOR AT LEAST 15 MIN . SKIN:WASH
W/MILD SOAP & WATER & APPLY SKIN CREAM. INHAL:REMOVE TO FRESH AIR &
CALL MD. APPLY ARTFICIAL RESPIRATION IF NECESSARY. INGEST:CALL MD
(F P N).

Fire Fighting

Flash Point Method:SCC
Flash Point:104F,40C
Lower Limits:1.1%
Upper Limits:6%
Extinguishing Media:FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:WATER IS NOT ORDINARILY EFFECTIVE. TENDS TO
SCATTER LIQUID & SPREAD FIRE. WEAR NIOSH/MSHA APPRVD SCBA & FULL
PROT EQUIP .
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES WITH
AIR.

Accidental Release

Spill Release Procedures:WEAR NIOSH/MSHA RESPIRATOR. FLUSH W/WATER INTO
RETAINING AREA OR CONTAINER. AVOID EXPOSURE TO SPARKS, FIRE OR HOT
METAL SURFACES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAME. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:SELF CONTAINED NIOSH/MSHA APPRVD RESP IF TLV IS
EXCEEDED.
Ventilation:LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH & SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:2
Vapor Density:>1
Spec Gravity:1.179
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:3.4% BY WEIGHT
Appearance and Odor:WHITE OPAQUE LIQUID, MILD SOLVENT ODOR.
Percent Volatiles by Volume:58.9

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMP MAY YIELD CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:LANDFILL, INCIN UNDER SAFE & SUPERVISED
CONDITIONS. DISPOSE OF I/A/W FEDERAL, STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.